Intermec CK31 User Manual page 58

Chapter 2 — Configuring the CK31
If you choose TLS:
a Load a user and root certificate on your CK31. For help,
b For Validate Server Certificate, choose Enabled and press
c You can also enter a User Name, Subject Name and
8 Exit Intermec Settings.
Configuring 802.1x Security With Microsoft Security
1 Make sure you have configured the communications and
radio parameters on your CK31.
2 Open Intermec Settings.
3 Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose Open.
6 For Data Encryption, choose WEP.
7 For 802.1X Authentication, choose TLS or PEAP.
If you choose TLS:
a Select Properties and tap the Run App button. The Auth.
b From the Auth. Settings box, choose the Select button.
c Select your certificate from the list and press Enter.
46
see "Loading a Certificate" on page 50 for help.
Enter.
Server Common Name if you want to increase your level
of security.
Settings box appears.
CK31 Handheld Computer User's Manual