Intermec CK31 User Manual page 53

Configuring WPA Security With Funk Security
Use these procedures to set WPA and WPA-PSK security on
your CK31 with Funk security.
To configure WPA security on your CK31 with Funk security
1 Make sure you have configured the communications and
radio parameters on your CK31.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Security
Settings > Funk Security > Profile.
5 For Association, choose WPA and press Enter. Encryption
automatically defaults to TKIP.
6 For Authentication, choose TTLS, PEAP, or TLS and press
Enter.
If you choose TTLS or PEAP:
a Select User name, type your user name, and then press
b Select Password prompt, choose Enter password now,
c Select User Password, type a user password, and then
d For Validate Server Certificate, choose Enabled and press
If you choose TLS:
a Load a user and root certificate on your CK31. For help,
CK31 Handheld Computer User's Manual
Enter.
and then press Enter.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
press Enter.
Enter.
Note: You must have the date on the CK31 set correctly
when you enable Validate Server Certificate.
see "Loading a Certificate" on page 50.
Chapter 2 — Configuring the CK31
41