Intermec CK31 User Manual page 47

Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the CK31 communicates with a host
computer directly using TCP/IP. The access point acts as a
bridge to allow communications between the wired network and
the wireless network.
CK31 in a TCP/IP Direct Connect Network
To use wireless communications in a TCP/IP network
1 Configure these network parameters on each CK31 in the
network:
• Network name (SSID)
CK31 Handheld Computer User's Manual
Chapter 2 — Configuring the CK31
TCP/IP
Direct Connect
Ethernet
Access point
CK31s
Host
35