Pf Motor Removal - Epson FX-880 Service Manual

PF Motor Removal

1. Remove the printer mechanism (see page 3-17).
2. Release the motor cable from the printer mechanism.
3. Set the release lever to the tractor feed position (forward).
4. Remove the 2 CBS (M3 × 8) screws securing the PF motor to the right sub frame, then remove the
PF motor.
If the release lever is in the friction feeding position, the PF motor cannot be removed.
Right Subframe
ESPON FX-880/FX-1180 Service Manual
CAUTION
Release Lever
MOVE LEVER
FORWARD
Cable
Figure 3-12. PF Motor Removal
Disassembly and Assembly
PF Motor
CBS Screw (M3 x 8)
3-21