Envelopes; Continuous Paper - Epson FX-880 Service Manual

Product Description

Envelopes

Envelope type
Width
Length
Insertion
Total thickness
Weight
Quality
Notes:
1. Printing on envelopes should be done only at normal temperatures and humidity.
2. Do not use CSF bin 2 when printing on envelopes.
3. Insert the longer side of the envelope horizontally.
A
B

Continuous Paper

Table 1-11. Specifications for Continuous Paper (single sheet and multi-part)
Insertion
Width
Length
Copies
Total thickness
Weight
Weight (multi-part)
Quality
Joining
1-8
Table 1-10. Specifications for Envelopes
No.6
6.5 inches (165 mm)
3.6 inches (92 mm)
Rear entry only
0.0063 to 0.020 inches (0.16 to 0.52 mm)
The variation in thickness in the print area, due to envelope construction,
must be within 0.0098 inches (0.25 mm).
12 to 24 lb (45 to 90 g/m
Airmail envelopes without glue on the flap, bond envelopes, and plain
envelopes.
A The minimum top and bottom margins are 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.12 inch (3 mm).
B
A
Figure 1-3. Margins for Envelopes
Front entry, rear entry, bottom entry
FX-1180: 4 to 16 inches (101.6 to 406.4 mm)
FX-880: 4 to 10 inches (101.6 to 254 mm)
4 to 22 inches (101.6 to 558.8 mm)
1original + 5 copies
0.0025 to 0.018 inches (0.065 to 0.46 mm)
14 to 22 lb (52 to 82 g/m
12 to 15 lb (40 to 58 g/m
Plain paper, recycled paper, carbonless multi-part
Apply small dots of glue, or paper staple (crimp) both the right and left sides.
9.5 inches (241 mm)
4.1 inches (105 mm)
2
)
2
)
2
)
EPSON FX-880/FX-1180 Service Manual
No.10