Spring Regi - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.47 Spring Regi

4.2.47.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Shaft 14 (Section 4.2.51).
5. Remove the Gear 14 (Section 4.2.51).
6. Remove the P/H Assy (Section 4.2.42).
7. Using a small screwdriver, unhook the right Spring Regi secured to the
Bearing Metal R.
8. Using a small screwdriver, unhook the right Spring Regi secured to the
Chute Bottom Upper.
9. Using a small screwdriver, unhook the left Spring Regi secured to the
Bearing Metal L.
10. Using a small screwdriver, unhook the left Spring Regi secured to the
Chute Bottom Upper.
11. Draw downward the right Spring Regi from the P/H Assy.
12. Draw downward the left Spring Regi from the P/H Assy.
4.2.47.2 Assembly
1. From the left side of P/H Assy, pass the hook at the top of Spring Regi
through a section between Roll Regi Metal and Chute Inlet.
2. From the P/H Assy, engage the hook at the top of left Spring Regi with the
Bearing Metal L.
3. From the P/H Assy, engage the hook at the bottom of left Spring Regi with
the Screw Earth.
4. From the right side of P/H Assy, pass the hook at the top of Spring Regi
through a section between Roll Regi Metal and Chute Inlet.
5. From the P/H Assy, engage the hook at the top of right Spring Regi with
the Bearing Metal R.
Disassembly and Assembly
6. From the P/H Assy, engage the hook at the bottom of right Spring Regi
with the Screw Earth.
7. Mount the P/H Assy (Section 4.2.42).
8. Mount the Gear 14 (Section 4.2.51).
9. Mount the Shaft 14 (Section 4.2.51).
10. Mount the Chute MBF Assy (Section 4.2.30).
11. Mount the Cover Front L/H (Section 4.2.5).
12. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly
Figure 4-64. Spring Regi Removal
Revision B
161