Epson EPL-N2050 Service Manual page 149

EPSON EPL-N2050
4.2.36.2 Assembly
1. Aligning the position exactly, secure the Sensor Photo: Paper Set to the
Chute Assy MBF with five hooks.
2. Plug the connector (P/J451) to the Sensor Photo: Paper Set.
3. Insert the Spring Tray Bottom MBF into two studs of Chute MBF Assy.
4. Mount the Tray Bottom Pick Up (Section 4.2.41).
5. Insert the Spring Tray Bottom MBF into two studs of Tray Bottom Pick Up
from the Chute MBF Assy.
6. Deflecting the right hook of Chute MBF Assy, rotate the Tray Bottom Assy
together with the Tray Bottom Pick Up toward the rear.
7. Insert two shafts of Chute MBF Assy into two stud holes of Tray Bottom
Pick Up to secure the Tray Bottom Assy with left and right hooks of Chute
MBF Assy.
8. Mount the Roll Assy MBF (with3-6, 28) (Section 4.2.31).
9. Mount the Gear Pick Up (Section 4.2.39).
10. Mount the Spring MSI 300 (Section 4.2.38).
11. Mount the Chute MBF Assy (Section 4.2.30).
12. Mount the Cover Front L/H (Section 4.2.5).
13. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly Disassembly and Assembly
Revision B
149