Epson EPL-N2050 Service Manual page 42

EPSON EPL-N2050
DRIVE TRANSMISSION TO FUSER ASSY
The mechanical energy created by the Motor Assy Main is transmitted
through the Gear Assy Drive to the Gear Idler of the Fuser Assy. The Gear
Idler transmits energy to the Gear H/R located on the Heat Roll, which
transmits energy to the Gear Decurl Roll.
Figure 2-11. Drive Transmission to Fuser Assy
Operating Principles
DRIVE TRANSMISSION TO EXIT COMPONENTS
The mechanical energy created by the Motor Assy Exit is transmitted through
small gears to the three Gears (Gear Exit 17). Those Gears are located on the
Roll Assy Mid-1 (upper and lower) and the Roll Assy Mid-2 respectively.
Figure 2-12. Drive Transmission to Exit Components
Overview
Revision B
42