Connector And Guide Socket - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.18 Connector and Guide Socket

4.2.18.1 Removal
1. Draw out the Cassette Assy from the printer.
NOTE: In the following steps, take care not to drop and miss the
Spring Motor.
2. Remove the two screws securing the Holder L to the Cassette Assy.
3. Remove the Holder L from the Cassette Assy together with the Spring
Motor.
NOTE: In the following steps, take care not to drop and miss the
Spring.
4. Unplug the connector (P672/J673) of the Motor Assy from the Connector.
5. Remove the two screws securing the Guide Socket to the Cassette Assy.
6. Remove the Guide Socket together with Connector from the Cassette
Assy.
7. Remove the Spring (Section 4.2.19).
8. Sliding the Connector upward, disconnect it from the Guide Socket.
Disassembly and Assembly
Figure 4-23. Removal of Connector and Guide Socket (1)
Disassembly and Assembly
Revision B
121