Epson EPL-N2050 Service Manual page 177

EPSON EPL-N2050
4.2.60.2 Assembly
1. Insert the Bearing Exit into the left and right shafts of Roll Assy MID-2.
2. Mount the Roll Assy MID-2 together with the left and right Bearing Exits
on the Roll Assy MID-2 to the Chute Assy Exit.
3. Secure the left and right shafts of Roll Assy MID-2 to the Chute Assy Exit
with the hook of Bearing Exit.
4. Aligning the position exactly, insert the Gear Exit-32 into the Chute Assy
Exit.
5. Insert the Gear Exit-17 into the shaft of Roll Assy MID-2 from the Chute
Assy Exit.
6. Hook the Gear Exit-17 to the shaft of Roll Assy MID-2.
7. Insert the Gear Exit-17 into the shaft of upper Roll Assy MID-1 from the
Chute Assy Exit.
8. Hook the Gear Exit-17 to the shaft of upper Roll Assy MID-1.
9. Mount the Chute Assy Exit (Section 4.2.64).
10. Mount the Eliminator Assy Exit (Section 4.2.57).
11. Mount the Cover Interlock (Section 4.2.62).
12. Mount the Plate Assy left (Section 4.2.70).
13. Mount the Cover Assy Top (Section 4.2.7).
14. Mount the Cover Left (Section 4.2.1).
15. Mount the Cover Assy I/F (Section 4.2.2).
16. Mount the Cover Rear (Section 4.2.12).
17. Mount the Cover Front L/H (Section 4.2.5).
18. Mount the Cover Assy Front (Section 4.2.3).
Disassembly and Assembly Disassembly and Assembly
Revision B
177