Epson EPL-N2050 Service Manual page 175

EPSON EPL-N2050
4.2.59.2 Assembly
1. Insert the Bearing Exit into the left and right shafts of lower Roll Assy
MID-1.
2. Mount the lower Roll Assy MID-1 together with the left and right Bearing
Exits on the Roll Assy MID-1 to the Chute Assy Exit.
3. Secure the left and right shafts of lower Roll Assy MID-1 to the Chute Assy
Exit with the hook of Bearing Exit.
4. Insert the Gear Exit-17 into the shaft of lower Roll Assy MID-1 from the
Chute Assy Exit.
5. Hook the Gear Exit-17 to the shaft of lower Roll Assy MID-1.
6. Insert the Bearing Exit into the left and right shafts of upper Roll Assy
MID-1.
7. Mount the upper Roll Assy MID-1 together with the left and right Bearing
Exits on the Roll Assy MID-1 to the Chute Assy Exit.
8. Secure the left and right shafts of upper Roll Assy MID-1 to the Chute
Assy Exit with the hook of Bearing Exit.
9. Aligning the position exactly, insert the Gear Exit-32 into the Chute Assy
Exit.
10. Insert the Gear Exit-17 into the shaft of Roll Assy MID-2 from the Chute
Assy Exit.
11. Hook the Gear Exit-17 to the shaft of Roll Assy MID-2.
12. Insert the Gear Exit-17 into the shaft of upper Roll Assy MID-1 from the
Chute Assy Exit.
13. Hook the Gear Exit-17 to the shaft of upper Roll Assy MID-1.
14. Mount the Chute Assy Exit (Section 4.2.64).
15. Mount the Eliminator Assy Exit (Section 4.2.57).
16. Mount the Cover Interlock (Section 4.2.62).
17. Mount the Plate Assy left (Section 4.2.70).
18. Mount the Cover Assy Top (Section 4.2.7).
19. Mount the Cover Left (Section 4.2.1).
Disassembly and Assembly
20. Mount the Cover Assy I/F (Section 4.2.2).
21. Mount the Cover Rear (Section 4.2.12).
22. Mount the Cover Front L/H (Section 4.2.5).
23. Mount the Cover Assy Front (Section 4.2.3).
Figure 4-78. Removal of Bearing Exit and Roll Assy MID-1 (2)
Disassembly and Assembly
Revision B
175