Sensor Photo: Paper Set - Epson EPL-N2050 Service Manual

EPSON EPL-N2050

4.2.36 Sensor Photo: Paper Set

4.2.36.1 Removal
1. Remove the Cover Assy Front (Section 4.2.3).
2. Remove the Cover Front L/H (Section 4.2.5).
3. Remove the Chute MBF Assy (Section 4.2.30).
4. Remove the Spring MSI 300 (Section 4.2.38).
5. Remove the Gear Pick Up (Section 4.2.39).
6. Remove the Roll Assy MBF (with3-6, 28) (Section 4.2.31).
7. Disengaging two hooks that secure the Tray Bottom Assy to the Chute
MBF Assy, open the Tray Bottom Assy toward the front.
8. Remove the Tray Bottom Pick Up (Section 4.2.41).
9. Draw off the Spring Tray Bottom MBF from two studs in the Chute MBF
Assy.
10. Unplug the connector (P/J451) from the Sensor Photo: Paper Set.
11. Disengage five hooks of Sensor Photo: Paper Set, and remove the Sensor
Photo: Paper Set from the Chute Assy MBF.
Disassembly and Assembly
Figure 4-50. Removal of Sensor Photo: Paper Set (1)
Figure 4-51. Removal of Sensor Photo: Paper Set (2)
Disassembly and Assembly
Revision B
148