Troubleshooting For Error Messages - FUNAI WD6D-D4413DB Owner's Manual

Symptom
Titles cannot be edited or deleted.
Dubbing cannot be executed.
Titles cannot be edited or deleted.
The capacity of the disc doesn't
increase even if the recorded
programme is deleted.
Dubbing cannot be executed.
The remote control does not function.

Troubleshooting for Error Messages

Error message
Disc Error
— Please eject the disc. —
Playback feature may not be
available on this disc.
Unknown USB Device/File
— Please Remove the USB. —
Insert a compatible USB device.
Region Error
— Please eject the disc. —
Playback is not authorized in your
region.
Parental Lock On
The current selected parental level
prohibits playback.
Recording Error
This programme is not allowed to be
recorded.
Recording Error
This programme is not recordable in
Video mode.
Recording Error
Can not record on this disc.
Recording Error
Cannot record. Disc not CPRM
comp.
Recording Error
This disc is protected and not
recordable.
Recording Error
Disc is full.
(No area for new recording)
76
EN
• The titles or the disc itself may be protected. Cancel the protection by following
the steps on page 57 for title protection and page 41 for disc protection.
• When the number of the titles or the chapters exceeds the maximum recordable
number, the dubbing will not be executed.
• The titles in the DVD-R cannot be edited or deleted if they are finalised. If it is
DVD-RW, undo the finalisation by following the steps on page 41.
• With video mode DVD-RW, the disc space will increase only when the last title is
deleted. With DVD-R, deleting a title will not increase the disc space.
• Check if the disc is compatible for recording. (See page 28.)
• No batteries in the remote control or the batteries may be weak. Replace the
batteries.
• Make sure there is no obstacle between the remote control and the unit.
• Try getting closer to the unit. (See page 12.)
• If above solutions do not solve the problem, please call an Authorised Service
Centre.
Cause
• An unplayable disc is inserted in the unit.
• The disc is upside down.
• Format of the files in the connected USB
device are not supported.
• Incompatible USB device is connected.
• Playback is not authorised in the region
of the DVD-video that you inserted in the
unit.
• The current selected parental level in
"Setup" menu prohibits playback.
• The recording function encountered a
copy prohibited programme.
• Original source is in NTSC system.
• You are trying to record a copy-once
programme onto a DVD-RW disc in
video mode.
• You are trying to record onto a disc that
is unrecordable, or the disc status does
not satisfy recording requirements.
• The disc is dirty.
• The disc is damaged.
• You are trying to record onto a VR mode
DVD-RW disc which contained
recordings from another recorder.
• You are trying to record a copy-once
programme onto a DVD disc that is not
compatible with CPRM.
• You are trying to record onto the VR
mode DVD-RW disc that is set as
protected in "Setup" Menu.
• You are trying to record onto the VR
mode DVD-RW disc that has no space
for recording.
Remedy
Solution
• Insert a standard disc. (See pages 8-9.)
• Insert the disc with the labelled side
facing up.
• Insert a compatible USB device with
supported file format. If this does not
solve the problem, use other type of
compatible USB device.
• Insert a DVD-video with region codes 2
or ALL.
• Check the "Parental Lock" setting.
(See page 64.)
• You cannot record copy prohibited
programmes.
• Set "Format Mode" to "VR mode".
(See page 30.)
• Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 28.)
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Disc may need formatting.
• Insert a ver. 1.1 or ver. 1.2 DVD-RW
disc. (Compatible with CPRM.)
• Remove the disc protect setting in "DVD
Menu" menu. (See page 41.)
• Insert a recordable disc with enough
recording space.
• Delete unnecessary original titles.
(See page 55.)