Tv View Operation - FUNAI WD6D-D4413DB Owner's Manual

4
Select "Auto Tuning" using [K L], then press
[ENTER OK].
The unit will start storing channels available in your area.
DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information
The tuner scans and memorises all the active DVB
channels (TV / Radio) in your area.
Channel Search
S.No. TV Channel
14 E4
13 More4
32 Film4+1
28 ITV4
75 CITV
34 SETANTA SPORT
Channel 69 UHF
Progress
Exit
OK
5
Press [ENTER OK] to exit.
• After auto tuning is completed, the lowest memorised
DVB channels appears on the screen.
• You can use [PROG.
channels.
Note
• If you press [RETURN BACK] or [SETUP] during the
scanning, auto tuning will be cancelled.
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and individually.
1
Follow steps 1 to 3 in "Auto Tuning (DVB)" on
pages 22-23.
2
Select "Manual Tuning" using [K L], then
press [ENTER OK].
3
Select your desired position number using
[K L], then press [ENTER OK].
Channel Auto
• The tuner will begin to search up or down automatically.
When a DVB channel is found, the unit will stop
searching.
• When "Auto" is selected, the unit will search for the
channels which have not been stored in channels
memory.
4
Press [SETUP] to activate the setting.
Service Update
DVB
This unit has "Service Update" function which searches and
stores newly available digital channels automatically at 8:00. If
a new channel is found, a message will appear on the screen
when you turn on the DVB channel at first time after storing a
new channel. Press any button to clear the message.
S.No. Radio Channel
102 Teletext Cars
729 RadioMusicShop
728 Heart
858000KHz/8M
100%
RETURN Back
] to change the DVB
Country Setting
DVB ANALOG
You can set the country for receiving your local channels
properly. This setting is mainly for digital channels.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Channel" using [K L], then press
[ENTER OK].
3
Select "Country" using [K L], then press
[ENTER OK].
4
Select your desired country using [K L], then
press [ENTER OK].
Country
France
Spain - Peninsula
Spain - Canary Islands
Germany
Italy
Switzerland
Czech Republic
Other
Digital channels cannot be received properly for the
countries not listed above.
In such case, select "Other".
5
Press [SETUP] to exit.

TV View Operation

The following operations are available while viewing TV
channels through this unit's tuner.
Select a Channel
DVB ANALOG
To switch DVB, analogue and external input (AV1/AV2/
DV(AV3)) mode.
Press [INPUT SELECT] repeatedly to select DVB, analogue
or external input mode.
The mode changes as follows:
DVB mode Analogue mode
You can select external input mode (AV1/AV2/DV(AV3)) by
pressing [PROG. ] repeatedly.
The mode changes as follows:
External input mode (with [PROG.
AV1 AV2
You can select a channel using [PROG.
enter the channel using [the Number buttons].
Notes on using [the Number buttons]:
• For one or two-digit number channels, the channels will be
identified for 2 seconds after you press the channel number.
You can only select channels 1~899 (Digital) or
1~99 (Analogue).
If you cannot get a "Station Name" of Analogue channel, it is
not indicated with a channel number.
External input mode
] buttons)
DV(AV3)
] or directly
23
EN