Timer Recording (Epg); Satellite Link - FUNAI WD6D-D4413DB Owner's Manual

Timer Recording (EPG)

DVB
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
With EPG system, you can programme DVB channel
recording much easier. You can only choose one programme
and enter the selection.
Refer to "EPG (Electronic Programme Guide)" on page 27.
1
While viewing a DVB programme, press
[GUIDE].
List of DVB programmes will be displayed.
e.g.) Daily Mode
EPG [Daily Mode] 13:38 Mon 17/05
13:35-14:05 The Simple Life
Mon 17/05
ITV1 13:35-14:05
ITV2 14:05-14:35
ITV3 14:35-15:30
Channel 4+1 15:30-16:25
More4 16:25-17:00
ITV4 17:00-17:30
E4 17:30-18:30
Daily Weekly
Watch
OK RETURN
Press [RED] to display "Daily Mode".
Press [GREEN] to display "Weekly Mode".
2
Select a desired programme using
[K L 0 1], then press [ENTER OK] or
[BLUE].
3
Set "End", "REC To", "Speed" and "STTL"
using [K L 0 1], then press [ENTER OK].
4
Press [TIMER SET] to return to the timer-
standby mode.
Note
• EPG timer recording will stop if the broadcaster sends the
EPG programme end or if you press [STOP C] on the front
panel or press [STOP C] on the remote control, then select
"Yes" using [K L], then press [ENTER OK].
• If "Auto Clock Setting" is "OFF", "Timer Recording (EPG)"
may not be able to perform.
• If you select a programme that is broadcasting in progress,
"Watch" is indicated next to
[ENTER OK], you can watch the selected programme.
• If you select a programme that is not broadcasted yet,
"Timer" is indicated next to
[ENTER OK], you can set "Timer Recording".
36
EN
DVD-R DVD-R DVD-R
The Simple Life
Style Her Famous
Joan of Arcadia
Smallville
Hollyoaks
Friends
Friends
Timer
Info
Exit i +
24Hrs
. When you press
OK
. When you press
OK

Satellite Link

You can set the unit to start recording whenever it detects the
video scart control from the external tuner.
Preparing for the satellite link timer recording:
[Preparation of the external tuner]
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set it
to be turned on when it comes to the time you want to
start recording, and off when it comes to the time you
want to finish recording. (Refer to the tuner's manual on
how to set the timer.)
• Make sure to turn off the external tuner when you finish
setting.
[Preparation of this unit]
• Make sure to select the desired recording speed
beforehand.
External tuner
(not supplied)
Scart cable (not supplied)
1
In stop mode, press [DVD]/[VCR] to select the
DVD mode or the VCR mode, then select the
recording speed using [REC SPEED].
2
Press [SAT.LINK].
• "Sat" will appear on the front panel display and the unit
goes into the satellite link standby mode.
To cancel the satellite link function in the satellite link
standby mode:
Press [TIMER SET] or [SAT.LINK] to turn on the unit.
To cancel the satellite link function while the satellite link
recording is in progress:
On the front panel
Press [STOP C].
On the remote control
1 Press [STOP C].
2 Select "Yes" using [K L], then press [ENTER OK].
DVD