Selecting The Audio Mode - FUNAI WD6D-D4413DB Owner's Manual

Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [K L], then press
[ENTER OK].
3
Select "Format" using [K L], then press
[ENTER OK].
4
Select "Start" using [K L], then press
[ENTER OK].
A pop up window will appear and prompt you to confirm.
5
Select "Yes" using [K L], then press
[ENTER OK].
e.g.) VR mode DVD-RW
Are you sure?
Yes
No
Formatting will start.
If you want to cancel formatting, select "No".
6
Formatting is complete.
Note
• It is not possible to use a disc formatted with another DVD
recorder. The disc needs to be reformatted with this unit. But
this unit may not be able to reformat some discs that are not
previously formatted by this unit (e.g. DVD disc formatted by
PC or another recorder).

Selecting the Audio Mode

This unit can receive bilingual broadcasts.
You can switch between modes by pressing [AUDIO]. Each
mode is indicated on the TV. When you record a DVB channel,
only output sound channel will be recorded.
Setting External Input Audio
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
When the external input audio is a bilingual broadcast, you
can choose "Stereo" or "Bilingual" to record on a DVD. This
setting is only for recording external input (AV1/AV2).
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "External Input Audio" using [K L],
then press [ENTER OK].
4
Select "Stereo" or "Bilingual" using [K L],
then press [ENTER OK].
External Input Audio
Stereo
Bilingual
5
Press [SETUP] to exit.
Note
• If you select "Stereo":
The audio will be recorded as "stereo audio".
• If you select "Bilingual":
The audio will be recorded as "bilingual audio". (See "Setting
Bilingual Recording Audio" on page 31 for more detail.)
DVD-R DVD-R DVD-R
Setting Bilingual Recording Audio
Video
DVD-RW DVD-RW DVD-RW DVD-R DVD-R DVD-R
You can select either "Main" or "Sub" audio to record a
bilingual broadcast in video mode.
This setting is only for recording analogue channel.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Bilingual Recording Audio" using
[K L], then press [ENTER OK].
4
Select "Main" or "Sub" using [K L], then
press [ENTER OK].
Bilingual Recording Audio
Main
Sub
5
Press [SETUP] to exit.
Note
• If you want to record onto a VR mode disc, both "Main" and
"Sub" will be recorded regardless of your setting here. And
when you play back, you can choose either audio format or a
combination of both as your playback audio.
Recording Audio Select (1H)
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
You can enjoy high quality sound recording. This function
works only when the recording speed is set at 1H.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Recording Audio Select (1H)" using
[K L], then press [ENTER OK].
4
Select "PCM" or "Dolby Digital" using [K L],
then press [ENTER OK].
Recording Audio Select (1H)
PCM
Dolby Digital
PCM: Records PCM audio for the best quality
sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
5
Press [SETUP] to exit.
Note
• "PCM" stands for Pulse Code Modulation. It changes
analogue sound to digital sound without compressing audio
data.
• When the recording speed is set at other than 1H, the unit
records "Dolby Digital" audio automatically even if you
selected "PCM".
DVD-R DVD-R DVD-R
EN
31