Settings For External Equipment - FUNAI WD6D-D4413DB Owner's Manual

Note
• If you have not set the clock, the clock setting window will
appear and follow to " Clock Setting" on page 67.
• You cannot set the End time for the satellite link timer
recording on this unit.
• Recording picture will be distorted if the copy protection
signal is being detected during satellite link timer recording.
• When a regular timer recording and the satellite link timer
recording are overlapped, the examples are given below.
Example 1
Timer
Recording
Satellite Link
Actual
Recording
Example 2
Timer
Recording
Satellite Link
Actual
Recording
Example 3
Timer
Recording
Satellite Link
Actual
Recording

Settings for External Equipment

Video Colour System
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto, PAL or
SECAM.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K L], then press [ENTER OK].
2
Select "Recording" using [K L], then press
[ENTER OK].
3
Select "Video Colour System" using [K L],
then press [ENTER OK].
4
Select "Auto", "PAL" or "SECAM" using [K L],
then press [ENTER OK].
General Setting
Playback
Auto Chapter
Display
Recording Audio Select (1H)
Video
Auto Finalise
Recording Video Colour System
Aspect Ratio (Video mode)
Clock
Auto
Dubbing Mode
Channel
PAL
Bilingual Recording Audio
DivX
SECAM
External Input Audio
HDMI
DVB Setting Video Colour System
Reset All
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to PAL.
SECAM: The video colour system will be set to
SECAM.
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or SECAM
is detected, an error message appears on the screen and
recording will be paused. Recording will be resumed when a
PAL or SECAM signal is detected.
Recording from External Equipment
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
Before recording from external equipment, see page 19 for
connection instructions.
1
Turn on the TV and be sure to select the input to
which the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN CLOSE EJECT A] to open the
disc tray, then place the disc to record on.
Press [OPEN CLOSE EJECT A] again to close
the disc tray.
VCR VCR
DVD-R DVD-R DVD-R
EN
37