Explanation Of The Dip Switches - Brother KE-430B Service Manual

8. ELECTRIC MECHANISM
８-５. Explanation of the DIP switches
８-５-１. Operation panel DIP switches (KE-430*, 431*, 432*, 433B, 434*, 435*, 484C, BE-438*)
Note:
Always turn off the power before setting the DIP switches.
3615Q
DIP switch A
Switch
DIPA-1
DIPA-2
DIPA-3
DIPA-4
DIPA-5
DIPA-6
DIPA-7
DIPA-8
147
Presser does not automatically lift after sewing is
completed.
Pedal mode is switched.
User program mode is available.
-
The work clamp does not rise automatically when a split is found.
Displays the enlargement/reduction ratio in millimeter units instead of as a
percentage. (After changing this setting, be sure to carry out the auto-clear
operation by referring to page 164.)
Enlargement of pattern size is not available.
Program number is fixed.
KE-430B, 430C series
All DIP switches are set to OFF at the
time of shipment.
Motion when set to ON
See "8-8. Setting the work
clamp mode"