Brother KE-430B Service Manual page 160

8. ELECTRIC MECHANISM
<Memory switches 30 - 4F>
30 to 4F are set by entering two-digit values.
These values are incremented using the P2 switch, and decremented using the P4 switch.
Possible
Switch
setting range
0 - 30
memo-30
0 - 99
0 - 30
memo-31
0 - 60
12 - 27
memo-32 12 - 25
12 - 22
1 - 10
memo-33
1 - 15
memo-34 0 - 5
memo-35 3 - 9
memo-36 -
memo-37 1 - 20
memo-38 1 - 20
memo-39 1 - 20
*** Default values for each model setting
Model
KE-430*
KE-431*
KE-432*
KE-433B
KE-434*, 435*,
484C
BE-438*
153
Initial
Units
value
mm ***
mm ***
27

25
100rpm
22
5
7.5
10
0
Stitch
1

4
100rpm
- -
7.5
10
7.5
10
10
7.5
1
Default value for memo-30
30
30
12
30
99
(If the value is set to 99, the maximum
length allowed will be 100 mm)
7 (Limited to 6.4 mm)
KE-430B, 430C series
Explanation
<KE-430*, 431*, 432*, 433B, BE-438*>
Limits the maximum area in the horizontal direction (X).
<KE-434*, 435*, 484C>
Limits the maximum area in the horizontal direction (X).
<KE-430*, 431*, 432*, 433B, BE-438*>
Limits the maximum area in the vertical direction (Y).
<KE-434*, 435*, 484C>
Limits the maximum area in the vertical direction (Y).
<KE-430*, 431*, 432*>
Changes the maximum sewing speed.
<KE-433B, 434*, 435*, BE-438*>
Changes the maximum sewing speed.
<KE-484C>
Changes the maximum sewing speed.
<KE-430*, 431*, 432*, 433B, 434*, 435*, 484C>
Changes the feed timing
1 (Fast)  5 (Standard)  10 (Slow)
<BE-438*>
Changes the feed timing
1 (Fast)  10 (Standard)  15 (Slow)
<KE-430*, 431*, 432*, 433B, 434*, 435*, 484C>
The (setting value + 1) number of stitches are sewn at
the speed set by memo-35 at the sewing start. (No
low-speed sewing if set to 0.)
<BE-438*>
The (setting value + 1) number of stitches are sewn at
the speed set by memo-35 at the sewing start. (No
low-speed sewing if set to 0.)
Changes the sewing start speed for the number of
stitches specified by memo-34.
Changes the feed timing one stitch before the sewing
end.
1 (Fast)  10 (Standard)  20 (Slow)
Changes the feed timing two stitches before the sewing
end.
<KE-430*, 431*, 432*, 433B, 434*, 435*, 484C>
Changes the feed timing for the third stitch at the
1 (Fast)  10 (Standard)  20 (Slow)
sewing start.
<BE-438*>
Changes the feed timing for the third stitch at the
1 (Fast)  10 (Standard)  20 (Slow)
sewing start.
Default value for memo-31
-
26
10
3
30
60
7 (Limited to 6.4 mm)