Brother KE-430B Service Manual page 85

3386Q
3387Q
3382Q
Make a gap of 1.0 mm between
the magnet of timing pulley
assembly U and the
chronizer assembly, and then
align the rear set screw in the
rotation direction of timing pulley
assembly U with the screw stop
position and tighten the set
screw at that position.
KE-430B, 430C series
20. Setting plate packing
21. Frame side cover
22. Blind plate
23. Screws [4 pcs]
24. Belt cover support pillars [2 pcs]
25. Synchronizer assy
26. Screws [2 pcs]
27. Timing pulley assy, U
28. Set screws [2 pcs]
Rotation direction
syn-
3383Q
4. ASSEMBLY
78