Transferring Calls; Supervised Transfers - Panasonic DBS576 User Manual

To retrieve a call . . .
From a different extension
than the one that placed the
call on hold
From Floating Hold (also
known as System Park Pick
Up)
Note: The number of floating hold orbits available may very depending on the
Station/Floating Park Hold Pickup setting (FF1-0-02-0025). The call pickup access
code can set to *9 (default). The "*9" access code operates as follows:
System Size
96
Above 96

TRANSFERRING CALLS

You can transfer a call to an open extension, a busy extension, or an outside line.
These transfers can be either supervised or unsupervised.
Note: If a transferred call is not answered within a specified time, the call rings
again at the extension that transferred it.

Supervised Transfers

In a supervised transfer, you announce the call before transferring it. This allows
you to give the recipient information about the call.
To supervise the transfer of a call to another extension or an
outside number
1. While on a call, press the HOLD key.
2. Either dial the extension number or the outside line number to which the call will
be transferred.
576-20-750 DBS 576 (USA), issued January 1999
4. Handling Incoming Calls
Do . . .
Press the FF key that is flashing red.
a. Press the Floating Hold FF key.
OR
a. Enter the Floating Hold Answer code (default
= *9).
b. Enter the Floating Hold orbit number (001-
576[CPC-288/576], 01-96 [CPC-96] or 001-
099 [CPC-288/576] or 01-09 [CPC-96]. See
the note below.
Virtual Line Number and Operation
01-09 Floating Hold pick up
10-96: Station Partk Hold pick up purpose
001-099 Floating Hold pick up
100-596: Station Partk Hold pick up purpose
45