Panasonic DBS576 User Manual page 33

To delete a name assigned to a PSD number
Notes:
• This task requires a display phone.
• You need to know the PSD bin number for the PSD number in order to delete
an assigned name. To check the bin number for a key, see "Checking Speed
Dial Numbers" on page 40.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the Name Assignment mode.
5. Press the VOLUME key until the desired PSD bin number (80-99) is displayed.
6. Press the FLASH key to clear the current/default data.
7. Press the HOLD key.
Notes:
• It is strongly recommended that you assign the PSD bin number as a name for
the key at this point so that it will appear on the display for future use. The bin
number should be entered in the following format: "-PSDxx (or xxx)" where
xx or xxx = the actual bin number. Example: "-PSD901". For more
information, see "Assigning and Deleting Names for PSD Numbers" on page
29.
• If using a large-display phone, press the MENU key, then the key to the left
of 3(5621$/#',$/ to have the change reflected on the display.
576-20-750 DBS 576 (USA), issued January 1999
2. Setting Up Your Phone
33