Transferring Calls; Supervised Transfers; Unsupervised Transfers - Panasonic DBS 576 User Manual

To retrieve a call . . .
a. Press the Floating Hold FF key.
From Floating Hold
a. Enter the Floating Hold Answer code (default
= *9).
b. Enter the Floating Hold number for the held
call (001-576).

TRANSFERRING CALLS

You can transfer a call to an open extension, a busy extension, or an outside line.
These transfers can be either supervised or unsupervised.
Note: If a transferred call is not answered within a specified time, the call rings
again at the extension that transferred it.

Supervised Transfers

In a supervised transfer, you announce the call before transferring it. This allows
you to give the recipient information about the call.
To supervise the transfer of a call to another extension or to an
outside number
1. While on a call, press the HOLD key.
2. Either dial the extension number or the outside line number to which the call
will be transferred.
3. When the recipient answers, announce the call.
4. Complete the call by doing one of the following:
a. If On-hook Transfer is enabled for your extension, replace the handset or
press the ON/OFF key.
b. If On-hook Transfer is disabled for your extension, press the PROG key.
Note: On-hook Transfer requires system programming.

Unsupervised Transfers

In an unsupervised transfer, you do not announce the call to the person receiving the
576-25-750 DBS 576 (USA), issued March 1999
4. Handling Incoming Calls
Do . . .
OR
43