Replacing The Scan Engine - Intermec ScanPlus 1800ST Service Manual

Hide thumbs Also See for ScanPlus 1800ST:

Table of Contents

ScanPlus 1800ST Service Manual

9. To reassemble the 1800, reverse Steps 2 through 8 using a new laser frame, and

Replacing the Scan Engine

To replace the scan engine, you need the following tools:

You will need the following part:

To replace the scan engine

1. Open the 1800. For help, see "Opening the 1800" on page 1-7.

2. Wearing finger cots or non-powdered Latex gloves, remove and retain the exit

3. Remove and retain the buzzer cap.

1-18

then follow the procedure "Assembling the 1800" on page 1-8.

Finger cots or non-powdered Latex gloves

Small Phillips screwdriver

Scan engine (Part No. 3-360039-08)

window.

1800M017.eps

1800M019.eps

Table of Contents