Defender SN502-4CH Instruction Manual page 78

MOBILE VIEWING
Windows Mobile setup
Install viewing software, from your computer:
1. Connect phone to computer and open the memory card folder.
2. Insert included CD into drive and open up to view files.
3. Copy and paste the viewing software onto the phone's memory card or installation folder.
From your phone:
1. Open up the area that the software was saved to.
2. Select Asee software to open. If prompted where to install the program, choose storage device.
3. Once a file location is selected, select install. The program will begin to install.
4. Once the program installs, run the Asee program from your applications. The main program screen will display.
5. Navigate to settings and press enter.
6. The following information needs to be inserted:
User name: This is the user name you inserted for mobile settings on your DVR
Password:
This is the password you inserted for mobile settings on your DVR
Server: This will be the IP address of the DVR
Port:
This will be the mobile port you forwarded and specified on the DVR to view mobile settings we
recommend using port 1024
Channel:
This will be the camera you would like displayed when you view your DVR
7. Once the correct information has been inserted, select "OK" and a separate screen viewing your selected channel
will appear.
8. The mobile software allows you to change channels, control a PTZ camera as well as capture a video.
9. If you capture a picture it will be stored in the same file location the program was installed.
10. You can convert normal display to full screen display by clicking the screen from on mobile device.
Symbian Mobile
From your computer:
1. Connect phone to computer and open the memory card or installation folder.
2. Insert included CD into drive and open up to view files.
3. Copy and paste the viewing software onto the phone's memory card folder.
From your mobile phone:
1. Open the file location, and open up the Asee.sis file. Note: Directions may vary on the type of phone that is being
used. Refer to your phone instruction manual on how to access files from your mobile device.
2. The phone will begin preparation to install.
3. Once preparation is complete, the phone will request permission to install. Select "YES".
4. You will then be prompted to choose where you want the file to install (Phone memory or card memory, you can
choose either location.)
5. Once you have selected where you would like to install the program, select "continue" and the program will install.
6. Once the program has installed, go to applications and open the program.
7. Upon opening the program, you will be prompted to insert the following information:
Default access point: Choose the access point used to access the Internet
Server address:
SN502-4CH
Input the DVR's External IP address in this section
75