Defender SN502-4CH Instruction Manual page 22

MAIN MENU
Quality
To change the quality of the recorded video:
1. Select the drop down menu beside the channel(s) you would like adjusted.
2. Highlight the quality you would like to change to (Best, better, or good) and press select.
3. Select "apply" to save settings.
Frame Rate and Resolution
This DVR has the capability of changing it's FPS, this means that with higher FPS the recorded video will be smoother
and better quality, lower FPS will result in a choppy video (that takes much less space on your harddrive).
To adjust the frame rate of recorded video:
1. Select the drop down menu beside the channel(s) you
would like adjusted.
2. Highlight either "fixed" or "manual" to select the
framerate option.
3. If you select fixed, you will have the option of manually
choosing your resolution setting, choose either D1,
HD1, or CIF from the drop down menu to the right of
the frame rate option.
4. If you select manual, a framerate setup button will
appear next to the drop down list, click on this button.
5. The framerate setup screen will now open and you can
choose either CIF, HD1 or D1, and the exact amount of
frames per second you would like each camera to record
at. (more frames per second will decrease the amount
of video time that your harddrive can accomodate)
6. You can choose to copy settings from one camera to another by using the copy options under the FPS settings.
7. Select "apply" to save settings.
Audio Rec.
To turn audio recording On or Off:
1. Select the drop down menu beside "Audio Rec".
2. Highlight which camera you would like the audio to record from and press select. This has to be an audio supported
camera (not included) and it must be connected to the RCA audio input at the back of the DVR.
3. Select "apply" to save settings.
Note: Higher quality and resolution settings use up more space on your hard drive.
SN502-4CH
Set FPS Screen
19