Leds - SignaMax 065-7310F Series User Manual

Signamax ™ ™ ™ ™ 065-7310F 8-Port 100BaseFX Fiber Switches
LED
S
The array of LED indicators on the front panel conveys status
and configuration information to help you monitor and
troubleshoot the switch.
Figure 2: LED & Button Indicators
Port Status
Each port has an array of three LEDs to show status
information. The LEDs are identified by a corresponding array
of captions located beside the LEDs on the front panel.
LNK/ACT:
♦
The link indicator is the top LED. It is illuminated
whenever the port is connected to another working
network device.
transmitting or receiving data.
100:
♦
The middle LED shines whenever the switch detects
that the corresponding
100BaseFX segment.
FDX/COL:
♦
The lower LED is illuminated when the port is operating
in full-duplex mode. When this LED is off, the port is
operating in half-duplex mode.
the switch detects packet collisions on the port.
8
The LED flashes when the port is
port is connected to a
The LED flashes when
User Manual