Installation 8 - Windster RA35U30SS User Manual

3. COLD WEATHER INSTALLATION (OPTIONAL)
a. Check with your local building codes to see if a CFM reducer is an
acceptable alternative to make-up air.
b. Remove the RA35CFMR (CFM Reducer) and inspect for any sign of
defect or damage. (ie. Cracks, broken flips)
c. For UNDER CABINET installation: COMPLETE Step A
1 UNDER CABINET INSTALLATION THEN GO TO STEP E BELOW.
d. For WALL MOUNT installation: COMPETE Step A
WALL MOUNT INSTALLATION THEN GO TO STEP E BELOW.
e. Place the CFM reducer onto the outlet of the unit and seal the connection
point with aluminum tape. (Be sure it is secure with no opening or gaps)
f. Connect a
g. Finish off by sealing the connection point with aluminum tape.
Installation diagram available on next page
INSTALLATION
ducting to the collar of the CFM reducer.
9
D of Section
H of Section 2