The Image Colors Are Not Correct; Noise Appears In The Image When You View The Screen In A Dark Place; The Eyes Of The Subject Come Out Red; Dots Appear And Remain On The Screen - Sony Cyber-shot DSC-RX100 User Manual

DSC-RX100 | Shooting still images/movies | Cyber-shot User Guide
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/10/02/02/02.html (2 of 2)7/26/2012 10:58:25 PM
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a malfunction.
The close-up shoot function (Macro) does not work.
The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus adjustment may take some time when shooting
a close subject.
(Sports Action), (Landscape),
The date and time are not displayed on the screen.
While shooting, the date and time are not displayed. They are displayed only during playback.
The F value and shutter speed flash.
The exposure is incorrect. Correct [Exposure Comp.].

The image colors are not correct.

Adjust [White Balance]. [Details]
[Picture Effect] is selected. [Details]
Execute [Initialize] to reset settings to default.
The image is extremely bright or dark.
Execute [Initialize] to reset settings to default.

Noise appears in the image when you view the screen in a dark place.

The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is
no effect on the recorded image.
You can see a dark shadow on the image.
Depending on the brightness of the subject, you may see a dark shadow when you change the aperture. This is not a malfunction.

The eyes of the subject come out red.

Set [Red Eye Reduction] to [On]. [Details]
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
Correct the image using "PlayMemories Home."

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

The memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
The same image is shot several times.
Set [Drive Mode] to [Single Shooting].
Copyright 2012 Sony Corporation
(Night Scene) or (Fireworks) mode is selected in [Scene Selection].
[Details]
[Details]
[Details]
[Details]
[Details] [Details]
[Details]
[Details]
Back to top