Charging The Battery Pack - Sony Cyber-shot DSC-RX100 User Manual

DSC-RX100 | Charging the battery pack | Cyber-shot User Guide
Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/11/01/04/04.html7/26/2012 10:58:51 PM

Charging the battery pack

The supplied AC Adaptor is dedicated to this camera. Do not connect with other electronic devices. Doing so may cause a malfunction. Also, make
sure to use a genuine Sony AC Adaptor.
If the Power/Charge lamp of the camera flashes during charging, remove the battery pack being charged, and then insert the same battery pack
into the camera securely again. If the Power/Charge lamp flashes again, this may indicate a battery error or that a battery pack other than the
specified type has been inserted. Check that the battery pack is the specified type. If the battery pack is the specified type, remove the battery pack,
replace it with a new or different one and check that the battery is charged correctly. If the battery is charged correctly, a battery error may have
occurred.
If the Power/Charge lamp flashes even if the AC Adaptor is connected to the camera and the wall outlet (wall socket), this indicates that charging
has stopped temporarily and is on standby. Charging stops and enters standby status automatically when the temperature is outside of the
recommended operating temperature. When the temperature returns to the appropriate range, charging resumes and the Power/Charge lamp lights
up again. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
Copyright 2012 Sony Corporation
Top page > Precautions/About this camera > Precautions > Charging the battery pack
Search
Print
Back to top