Sony Cyber-shot DSC-RX100 User Manual page 73

DSC-RX100 | Drive Mode | Cyber-shot User Guide
Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/04/02/06/06.html7/26/2012 10:53:58 PM
Drive Mode
You can set a drive mode, such as continuous, self-timer, or bracket shooting.
[Drive Mode] can be set using the /
1. MENU 2 [Drive Mode]
Press / on the control wheel to select the desired setting when selecting a mode with its own setting values.
(Single Shooting)
(Cont. Shooting)
(Spd Priority Cont.)
(Self-timer)
(Self-portrait)
(Self-timer(Cont))
(Bracket: Cont.)
(WB bracket)
Related Topic
Drive Mode
Still shooting menu items not available in some REC modes
Copyright 2012 Sony Corporation
Top page > Using MENU items (Shooting) > Still shooting menu > Drive Mode
(Drive Mode) button.
desired mode
The camera shoots a single image without using the self-timer.
The camera shoots continuous images while the shutter button is pressed.
Shoots images continuously at high speed while you press and hold down
the shutter button. Focus and brightness settings of the first shot are used
for the following shots.
Sets the self-timer to a 10-second or 2-second delay.
When you press the shutter button, the self-timer lamp flashes and a beep
sounds until the shutter operates.
To cancel, press / again.
Sets the self-timer to Self-portrait timer.
When the camera detects the specified number of faces, a beep sounds,
and the shutter operates 2 seconds later.
The camera shoots continuous frames 10 seconds later after you press
the shutter button. Select the number of frames from three or five.
Shoots three images, each with different degrees of brightness. You can
set the value of bracket deviation (steps).
Shoots three images, each with different degrees of brightness according
to the selected settings of white balance, color temperature and color filter.
You can select the value of bracket deviation (steps) from [Lo] or [Hi].
Search
Print
Back to top