Sony Cyber-shot DSC-RX100 User Manual page 89

DSC-RX100 | DRO/Auto HDR | Cyber-shot User Guide
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/04/02/17/17.html (2 of 2)7/26/2012 10:54:28 PM
Since the shutter is released three times for one shot, be careful about the following:
Use this function when the subject is motionless or does not blink
Do not recompose.
You cannot use this function with RAW images.
You cannot start the next shoot until the capture process is completed after you shoot.
You may not obtain a desired effect depending on the luminance difference of a subject and the shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when significant camera shake or subject blur has occurred, you may not obtain good HDR images. If
the camera detects such situation,
recomposing or paying attention to the blur.
Related Topic
Still shooting menu items not available in some REC modes
Copyright 2012 Sony Corporation
is indicated on the recorded image to inform you of this situation. Shoot again, as necessary,
Back to top