The Aperture Value And/Or Shutter Speed Flashes; The Image Colors Are Not Correct; Noise Appears In The Image When You View The Screen In A Dark Place; The Eyes Of The Subject Come Out Red - Sony DSC-RX10M3 How To Use Manual

The area selected using [Area Setting] differs from the actual area. Select the
actual area.
[308] Troubleshooting

The aperture value and/or shutter speed flashes.

The subject is too bright or too dark to shoot using the current aperture value
and/or shutter speed settings. Readjust the settings.
[309] Troubleshooting

The image colors are not correct.

Adjust [White Balance].
[Picture Effect] is set. Set [Picture Effect] to [Off].
[Picture Profile] is set. Set [Picture Profile] to [Off].
To reset settings to default, perform [Setting Reset].
[310] Troubleshooting
Noise appears in the image when you view the screen in
a dark place.
The product is attempting to increase the visibility of the screen by temporarily
brightening the monitor under conditions of low illumination. There is no effect
on the recorded image.
[311] Troubleshooting

The eyes of the subject come out red.

Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies