Sony Cyber-shot DSC-RX100 User Manual page 43

DSC-RX100 | Sweep Shooting | Cyber-shot User Guide
http://esupport.sony.com/docs/dvimag/DSCRX100_guide/en/contents/02/03/10/10.html (2 of 2)7/26/2012 10:52:59 PM
Horizontal direction
First press the shutter button halfway so that you can lock the focus, exposure and white balance. Then press the shutter button fully down and
pan or tilt the camera.
If a section with greatly varied shapes or scenery is concentrated along a screen edge, the image composition may fail. In such a case, adjust the
frame composition so that the section is in the center of the image, then shoot again.
Notes
If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the composite image. If this happens, move the
camera faster to record a full panoramic image.
Since several images are stitched together, the stitched part will not be recorded smoothly.
When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness, color and focus, the shooting will not be
successful. If this happens, change the AE/AF locked angle and shoot again.
You cannot create panoramic images in the following situations:
You pan the camera too quickly or too slowly.
There is too much camera shake.
Related Topic
Scrolling panoramic images for display
Panorama: Size
Panorama: Direction
Functions not available in some REC modes
Still shooting menu items not available in some REC modes
Copyright 2012 Sony Corporation
Back to top