Samsung SPC-2010 User Manual page 29

LCD Backlight
You can set the controller's LCD backlight setting to OFF, ON or AUTO.
• AUTO : Turns the backlight off automatically if no command has been
entered in the last 30 seconds.
• ON : Keeps the backlight on at all times.
• OFF : Keeps the backlight off at all times.
Sleep
If the controller is not used for specified time, it switches to SLEEP mode.
Operating joystick or button of the controller exits SLEEP mode.
Buzzer
You can set the controller to beep on button pressings.
• ON: Each pressing of a button beeps.
• OFF: Pressing a button produces no sound.
Terminate
To prevent the attenuation of communication signals between the camera
and controller, the controller's termination option must be <ON> if it is
located farthest from the camera and controller communication loop. If the
controller is in the middle of the camera and controller communication loop,
turn the termination option <OFF>.
[  M A I N S E T U P  ]
3. BACKLIGHT : AUTO
[  M A I N S E T U P  ]
4. SLEEP : OFF
[  M A I N S E T U P  ]
5. BUZZER : ON
[  M A I N S E T U P  ]
6. TERMINATE : ON
English _29