Samsung SPC-2010 User Manual page 22

using the menu
PRESET
Move the camera to a pre-determined point.
To set a preset
1. Using the joystick and controller buttons, move the camera to a desired location.
2. Enter a preset number.
3. Hold down the [PRESET] button for 2 seconds to save the preset location.
To execute the preset
1. Select a camera.
2. Enter a desired number(s) using the number buttons and press [PRESET].
3. The preset will be executed.

M
You can select preset numbers from 1 to 255 using the controller. The maximum preset location number varies
depending on the camera model. (For more information, please refer to your camera's user manual.)

You can set up preset locations in the OSD menu of the camera.
GROUP
You can make a group of multiple presets before calling them in sequence.
To set a group
1. Enter the group number.
2. Press the [GROUP] button to activate the Group mode.

To pause the Group mode, move the joystick.

M
In order to use Group modes, you must set up the modes in the camera's OSD menu prior to actual operation.

Group function is available only for SAMSUNG-T/E protocol.
SAMSUNG-E protocol allows SCAN function.
22_ using the menu