Dvr Login - Samsung SPC-2010 User Manual

To control the DVR menu
1. To control the menus of the selected DVR, press [MENU] in the DVR control bar.
2. Use joystick and [ENT] to traverse DVR menu.
To control the PTZ device that is connected to DVR
Depending on used DVR model, you may not be able to directly control PTZ camera connected to the
DVR.
In such cases, press [PTZ/DVR] button in DVR control mode to switch to camera control mode, and
then you can control the camera.
To control the PTZ device in DVR mode
1. In DVR control mode, select a channel for PTZ control.
2. Press [ ] button to display "
3. Use joystick to control the PTZ camera connected to the DVR.
4. Press [ ] button again. "
the previous mode.

DVR login

When accessing DVR menu, logging in may prompt for password depending on the DVR's settings
configured.
• You can enter the DVR password as in the way of channel selection.
Ex) If the DVR's password is "4321", press buttons below in a row to login to the DVR.
[4] + [CAM] + [3] + [CAM] + [2] + [CAM] + [1] + [CAM]

M DVR password can be entered using the [FUNC] button too.
Refer to "To select a DVR channel". (Page 24)
" on the right bottom side of the monitor.
" on the right bottom side of the monitor disappears and restores
English _25