Table of Contents
Advertisement
7193 Owner's Guide
Chapter 6: Commands
The commands control all operations and functions of the 7193 printer, from selecting the
size and placement of characters and graphics on the receipt to feeding and cutting the
paper.
Note: All versions of the 7193 use the same commands as listed in this section unless
otherwise noted. For example, the Parallel interface requires unique commands for
controlling the cash drawer.
The 7193 commands emulate two printers: the NCR 7150™ Multifunction printer and the
Epson TM-T80™ Thermal printer. Any of the commands from either set may be used in
any combination to program a host computer to communicate with the 7193 (unless
otherwise noted).
Some commands listed and described here are not implemented in the 7193 (they are
identified as not implemented). If received, they are ignored and not sent to the print
buffer as data. Non-legal commands are sent to the print buffer as data.
Command List
This section groups the commands according to the following categories:
Within each group, the commands are listed in numerical order of their hexadecimal
codes. The page number refers to where a complete description of each command is given
in the "Command Descriptions" section which begins on page 47.
Printer Function Commands
These commands control the following basic printer functions and are listed in numerical
order of their hexadecimal codes:
Printer Function Commands
Print Characteristics Commands
Graphics Commands
Printer Status Commands
Real Time Commands
Bar Code Commands
Printing
Feeding the paper
Resetting the printer
Cutting the paper
Opening the cash drawers
Defining the print area
August 1998
Chapter 6: Commands
43
Advertisement
Table of Contents
