Operating Pronto Ng With Rf - Philips Pronto NG User Manual

Using the Power Features

Operating Pronto NG with RF

By default, Pronto NG uses infrared (IR) signals to operate devices. IR signals
have an operating distance of approximately 10 m (30 ft).
However, you can choose to have Pronto NG working with radio frequency (RF)
signals to operate devices from a distance or from an adjacent room.
An RF Extender (not included) is therefore required.
The SBC Li900 is an RF Extender that can be used in combination with
Pronto NG. The RF Extender receives RF signals from Pronto NG and converts them
into IR signals, sent out to the device. Therefore, the RF Extender has to be placed
near the device you are operating with the RF Extender's sending eye pointed
towards the device.
Pronto NG
User Guide
46
IR signals
RF signals
RF Extender
IR signals