Philips Pronto NG User Manual page 24

Customising Pronto NG
Learning a Button
1 Tap and hold the Pronto NG icon
touch screen for 3 seconds.
The Tools Menu appears.
2 Tap
The 'Learn Tool' screen appears.
3 Tap
The last page you have visited appears.
4 Navigate to the Device and the Page that contains the button you want
to learn.
5 Position Pronto NG and the remote control as illustrated above.
Note
6 Tap the button you want to learn.
A Learning indication appears in the upper right corner of the touch screen.
7 Press and hold the key on the other remote control for 1 second.
Make sure you press the key within 5 seconds.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
See 'Pronto NG will not learn commands' on page 54 for more information.
8 When you want Pronto NG to learn other buttons, repeat steps
6 and 7.
9 Press the left firm key labelled
stop learning.
Learning a Device Action
1 Tap and hold the Pronto NG icon
touch screen for 3 seconds.
The Tools Menu appears.
2 Tap
The 'Learn Tool' screen appears.
3 Tap
The Device Overview appears.
User Guide
22
in the Tools Menu.
.
Make sure that you aim Pronto NG's learning eye at the remote control's
IR window.
The distance between Pronto NG and the remote control should be between
10 and 20 cm (4 and 8 inches).
in the Tools Menu.
.
in the upper left corner of the
below the touch screen to
in the upper left corner of the