Table of Contents
Advertisement
7
i
INSTANT
yÚ
®
U
INSTANT
®
X
18
Record with your video recorder without EasyLink
using only an aerial cable
•
Select the programme number on your video recorder.
•
Set your video recorder to record.
(See the handbook for your video recorder.)
Switching programme numbers on your TV does not disturb recording !
using a eurocable connected to the
euroconnector
EXTERNAL 2
With a video recorder connected to
possible to record a programme from your TV as
well as from other connected equipment.
•
Select the programme number or external
input on the TV.
•
Select the right external on your video
recorder.
•
Set your video recorder to record.
You record what you are watching on the
screen.
Do not switch programme numbers or do not
switch off your TV when you are recording !
8
9
◊
0
0
ZOOM
f
h
P
fi
To record S-VHS quality, connect a S-VHS peripheral directly to the video
recorder.
1. Record a TV programme
it is
EXTERNAL 2
2.
Record a programme on your video recorder connected to
from Audio/Video equipment connected to
EXTERNAL 2
or
EXTERNAL 3
FRONT
•
Switch on the equipment.
•
Select the right external on your video recorder.
•
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !
Record with a video recorder with EasyLink
If you have connected a S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from a S-VHS peripheral connected to the front side of
the TV. (E.g. from a S-VHS camcorder.)
In TV mode it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
•
record key ® under the door of the remote control of the TV or
Press the
INSTANT
of the video recorder or the record key on the video recorder.
The video recorder switches on when it was in standby and a message of what is
being recorded appears on the screen.
The video recorder starts recording the programme that appears on the screen.
•
record key ® again to stop the recording.
Press the
INSTANT
When recording a programme from a peripheral connected to
, you can not select another TV programme on the screen.
FRONT
To watch TV programmes again, press the programme number you want to select
twice . Then the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording a programme from a peripheral connected
to
or
EXTERNAL 1, 3
FRONT
indicates that you are still recording. The blinking stops after the recording is finished.
using a eurocable connected to the
euroconnector
EXTERNAL 1
With a video recorder connected to
can only record a TV channel.
•
Select the programme number on the TV.
•
Select the right external on your video
recorder.
Switching to a programme from a connected
peripheral equipment does not disturb
recording .
, the blinking green lamp on the front of your TV
you
EXTERNAL 1
EXTERNAL 1,
or
EXTERNAL 1, 3
Advertisement
Table of Contents
