Customising Pronto NG
Adjusting the Settings
In the Settings Pages you can adjust several settings. You can:
Set the time and date as described earlier, on page 12;
Set the timeout of the LCD backlight;
Set the timeout of the LCD screen;
Set the level of the light sensor;
Set the volume level;
Set the language of the Pronto NG, as described earlier, on page 14;
Set Pronto NG to operate with the Cursor;
Set the animation mode;
Calibrate the touch screen.
In the third Settings Page you can consult the version information and the
available memory.
1 Tap and hold the Pronto NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Select
The first Settings Page appears.
Setting the Timeout of the LCD Backlight
The timeout of the LCD backlight determines how long the backlight of the touch
screen and the buttons stays active. Shortening the active time will increase
Pronto's battery life. The backlight timeout and the LCD screen timeout can work
independently.
1 Tap
The Backlight Timeout button is selected. The '+' and '-' labels appear on
User Guide
the two middle hard buttons below the touch screen.
30
in the upper left corner of the
.
in the first Settings Page.