Operating Pronto Ng With The Cursor - Philips Pronto NG User Manual

Using the Power Features
5 In the 'Timer' screen, tap
The 'Timer' screen closes and the Tools Menu appears again. The Timer icon
appears next to the time indication.
-or-
In the 'Timer' screen, tap
The Timer screen closes without activating the timer.
Note
Operating Pronto NG
with the Cursor
The cursor is set by default to operate the devices, e.g. to navigate through an
on-screen TV menu. The cursor contains 4 cursor keys: Right, Left, Up and Down.
Each cursor key contains an action list. This list depends on the device that is
being operated.
Toggle button
The cursor can also be used to navigate through devices and pages on Pronto NG's
touch screen.
When you enable the cursor navigation in the Settings Pages, the touch
screen navigation with the Left Device and Right Device buttons at the top area
of the touch screen disappears and the Cursor Navigation icon
the top left corner. You use the cursor for navigating, and not for operating your
devices, until you disable the cursor navigation again.
User Guide
44
In the Timers list, activated timers are displayed first, followed by the not-
activated timers. Both activated and not-activated timers are listed
chronologically.
Left
.
.
Up
Down Right
OK
Home button
appears in