Schwinn 125 Owner's Manual page 26

From the Power-Up Mode screen, push ENTER to go to User Setup Mode. If no User profile is set up, you can add a User. If
there is a User profile, you can edit or delete the User profile.
Note: Push the START/STOP button to go back to the previous screen or character.
Add User
1. From the Power-Up Mode screen, push ENTER and hold for 3 seconds to go to the User Setup Mode. If no User profile is
set up, the Console will show the Name prompt.
Note: Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and Z). To set
each letter, push the ENTER button.
Push and hold ENTER for 3 seconds to complete the entry and go to the next data prompt.
2. E nter your User data on each data screen—Age, Weight, Gender. Use the Increase/Decrease buttons to adjust the default
value, and push ENTER to complete each entry and go to the next prompt.
Note: The default age is 30. The default weight is 150 (lbs).
3. T he Console display shows the "Create Custom" prompt. Use the Increase/Decrease buttons to move to the YES or NO
option. To start the setup of your Custom Workout, go to YES and push ENTER.
To complete User Setup without a Custom Workout, go to the NO option and push ENTER. The Console goes back to the
Power-Up Mode screen.
4. After you start the Custom Workout setup, the Program Display will show the left column (workout interval) is active, with
a default resistance level of 3. Use the Increase/Decrease buttons to adjust the resistance level of the active interval. Push
ENTER to record the resistance level. The next column to the right becomes active.
Note: T he Console display shows the message "N of 20" during setup (N is the current interval). The maximum number of
intervals is 20.
5. Push and hold ENTER to complete the Custom Workout setup. The Console goes back to the CUSTOM prompt. Push
START/STOP to go back to the Power-Up Mode screen.
Edit User
1. From the Power-Up Mode screen, push ENTER and hold for 3 seconds to go to the User Setup Mode. If a User profile
is set up, the Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE <Name>). Use the
Increase/Decrease buttons to move through the Edit menu options, and push ENTER to make your selection.
T o exit the Edit option, push START/STOP and the console will go back to the Edit and Delete options.
2. After you start the Edit function, the Console will show the Name prompt. To edit the name, push ENTER.
Note: Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and Z). To set
each letter, push the ENTER button.
Push and hold ENTER for 3 seconds to complete the entry and go to the next data prompt.
3. To edit the other User data, push ENTER at the screen prompt: EDIT AGE, EDIT WEIGHT, EDIT GENDER. Use the
Increase/Decrease buttons to adjust, and push ENTER to complete each entry and go to the next prompt.
4. After you start the Custom Workout setup, the Program Display will show the left column (workout interval) is active, with
a default resistance level of 3. Use the Increase/Decrease buttons to adjust the resistance level of the active interval. Push
ENTER to record the resistance level. The next column to the right becomes active.
Note: T he Console display shows the message "N of 20" during setup (N is the current interval). The maximum number of
intervals is 20.
5. Push and hold ENTER to complete the Custom Workout setup. The Console goes back to the CUSTOM prompt. Push
START/STOP to go back to the Power-Up Mode screen.
26