Dell Dimension 5100 Service Manual page 58

3. Pivot the drive-panel insert out and away from the drive panel.
4. Set the drive-panel insert aside in a secure location.
Replacing the Drive-Panel Insert
1 drive-panel insert tab 3 center drive-panel tab
2 drive panel insert 4 drive panel
1. Slide the tab on the left side of the drive-panel insert under the center-drive panel tab.
2. Rotate the drive-panel insert into place and snap the drive-panel insert tab over the corresponding tab on the drive panel.
Replacing the Drive Panel
1. Follow the procedures in "Before You
2. Remove the computer cover
3. If you are installing a replacement drive panel, remove the old
1 sliding plate lever 3 drive panel
2 sliding plate 4 front panel
4. Align the drive panel tabs with the side-door hinges.
5. Rotate the drive panel toward the computer until it snaps into place on the front panel.
Begin."
if you have not already done so.
drive panel.