Dell Dimension 5100 Service Manual page 57

1 sliding plate lever 3 drive panel
2 sliding plate 4 front panel
3. Grasping the sliding plate lever, slide and hold the sliding plate until the drive panel snaps open.
NOTE: The sliding plate secures and releases the drive panel and helps to secure the drives.
4. Pivot the drive panel outward and lift away from the computer.
5. Set the drive panel aside in a secure location.
Removing the Drive-Panel Insert
1. Follow the procedures in "Before You
2. Remove the computer cover.
3. Remove the drive panel.
1 drive-panel insert tab
2 drive-panel insert
3 drive panel
1. Turn the drive panel sideways and find the tip of the drive-panel insert tab that latches over a tab on the right side of the drive panel.
2. Pull the inner tip of the drive-panel insert tab away from the drive panel.
Begin."