Configuration: General - Swann hdr8-8050 Instruction Manual

Configuration: General

The settings for
language, time
zone,
date & time and
Dayligh Savings
(DST)
have
changed during
the setup wiz-
ard.
Language: The language that the DVR's menus, alerts and other communications will
use. Multiple languages are available.
Resolution:
Set the output resolution of the DVR according to the display that is con-
nected. Check the documentation included with your display to see the maximum res-
olution supported.
Time Zone:
Set this to the time zone where you happen to be. For example, people in the
Australian Eastern Time zone (Canberra, Sydney and Melbourne) choose GMT+10:00,
whilst the Eastern Standard Time zone (USA and Canada) choose GMT-05:00 (GMT
stands for Greenwich Mean Time - it's the baseline that keeps all the different time
zones in sync).
Date Format:
The format the date will be displayed.
System Date:
You can manually set the date if it is incorrect.
System Time:
You can manually set the time if it is incorrect.
system
would
been
Mouse Pointer Speed: Move the slider to increase or decrease the mouse pointer
speed.
Enable Wizard:
When checked, the DVR will automatically run the setup wizard when
it is switched on. The wizard itself contains the option to disable it.
Enable ID Authentication:
When enabled, the DVR will require a username and pass-
word to access even for local users.
Don't forget to click "Apply" to save settings.
5