Setup Wizard: Account Configuration - Swann NVR-7085 models Instruction Manual

BASIC SETUP
EN

Setup Wizard: Account Configuration

Account Configuration
Here you can change the default password of the
Admin
account. For on-going protection against
unauthorized access, we strongly suggest setting a
Admin
new password for your
User Name: The NVR's default administration
account, which is always called "Admin". You can't
change the Admin user name.
Password: The password you'd like to be associated
with the Admin account. A password can be between
1 and 8 characters in length, and consists of numbers
only (no letters or symbols). The default password
that's masked on screen is "12345".
Confirm Password: Re-enter the password to
ensure accuracy.
Level: This field is greyed out because the
account always has the highest level of access. There are two additional access levels available - Guest and Operator.
Enable Password: Select this if you want to be prompted for the user account's password when accessing the main menu.
Display wizard when booting up (checkbox): Select this if you want the NVR to automatically run the configuration wizard when
it boots up. You can also run the wizard at any time by clicking the
Default Password Information
To ensure your privacy, this NVR supports password protection.
The default, all-access username is "admin". If the NVR asks you to log in before you've set a password, enter admin as
your username and leave the password blank. This will give you access to all areas of the NVR.
The password function is disabled by default. However, if you're asked for a password, the default is "12345".
To ensure your ongoing privacy, we strongly recommend setting a password as soon as possible. Choose something that
you'll remember, but that others would be unlikely to guess.
If you do manage to lock yourself out of the NVR, you'll need to contact us at the Swann Technical Support Telephone
Helpdesk - the number is on the back cover.
Finishing the Setup Wizard
When you click Finish, the NVR will update and save your settings. It may reboot while doing so.
account.
Admin
icon on the NVR menu bar.
15