Web Configurator Access - ZyXEL Communications ZyWALL USG100-Plus User Manual

1.4.1 Web Configurator Access

Make sure your ZyWALL hardware is properly connected. See the Quick Start Guide.
1
In your browser go to http://192.168.1.1. By default, the ZyWALL automatically routes this request
2
to its HTTPS server, and it is recommended to keep this setting. The Login screen appears.
Type the user name (default: "admin") and password (default: "1234").
3
If you have a OTP (One-Time Password) token generate a number and enter it in the One-Time
Password field. The number is only good for one login. You must use the token to generate a new
number the next time you log in.
Click Login. If you logged in using the default user name and password, the Update Admin Info
4
screen appears. Otherwise, the dashboard appears.
The Network Risk Warning screen displays any unregistered or disabled security services. Select
5
how often to display the screen and click OK.
Follow the directions in the Update Admin Info screen. If you change the default password, the
6
Login screen appears after you click Apply. If you click Ignore, the Installation Setup Wizard
opens if the ZyWALL is using its default configuration; otherwise the dashboard appears.
ZyWALL USG100-PLUS User's Guide
Chapter 1 Introduction
9