2.7.3 Setting Up the LAN IPv6 Interface
Select lan1 in the IPv6 Configuration section in the CONFIGURATION > Network > Interface
1
> Ethernet screen and click Edit.
The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6.
2
Type 2003:1111:1111:1::1/128 in the IPv6 Address/Prefix Length field for the LAN1's IP
address.
Enable Router Advertisement. Then click Add in the Advertised Prefix Table to add
2003:1111:1111:1::/64. The LAN1 hosts will get the network prefix through router
advertisements sent by the LAN1 IPv6 interface periodically. Click OK.
ZyWALL USG100-PLUS User's Guide
Chapter 2 How to Set Up Your Network
39